Brand : Imported
3 Inch Semi Automatic Disc Filter for Primary & Secondary Filtration
SKU : JS-HA-2021244
MRP :
₹9959
-
1
+
Get Extra ₹149 OFF on Prepaid Orders
Delivery By: Jun 17 - Jun 19
Add to Cart
Buy Now
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
3 Inch Semi Automatic Disc Filter for Primary & Secondary filtration
Specification
Description
3 Inch Semi Automatic Disc Filter for Primary & Secondary Filtration

Features :
  • Filter designed for Pressure rating PN8 (8bar)
  • 2 male threaded pressure port at the top for easy visibility of pressure.
  • Disc cartridge enabled with spring loaded for full compression of disc and loosen during cleaning.
  • Filter with Clogging indicator, Red pop up comes out at x 0.6 kg/cm² pressure differential, indicated end user to clean filter manually.
  • During cleaning operation, all inlet water passes through the pipe, and water jets removes dirt from the discs.
  • Barrel with 1½" Drain port.
  • Handle for 90 degree rotation for cleaning of disc without dismantling of filter.
  • Disc housing fan gives hydro cyclonic effect which makes particles in suspension that reduces cleaning frequency.
  • Grooved disc design with dimensional consistency proven with more than 95% filter efficiency

Specifications :
  • Model No. : HT-136TSA
  • Brand : Imported
  • Product Type : Semi Automatic Disc Filter
  • Recommended flow : 667 lit/m (40 m3/hr)
  • Max. Working Pressure : 8 kg/cm2
  • Range of Flow Rate : 35-50 m3/hr
  • Filter Disc (standard) : 120 mesh PP Red disc (Single Removable cartridge)
  • Filtration Surface area : 1590 cm2
  • Inlet/outlet connection : 3" BSP/NPT male thread
  • Closing System : Stainless Steel / Hybrid Clamp
  • Distance between End connections : 344 mm
  • Filter height (With Ball Valve) : 930 mm
  • Filter width (With End Plug) : 235 mm
  • Cartridge Diameter : 121 mm
  • Cartridge Length : 510 mm
  • Drain Valve (1 no.) : 1½" Female x Female threaded
  • End Plugs (1 no.) : ¾" Male Threaded

Cleaning Instructions : 
  • Cleaning of the filter must be done when pressure differential across the disc reaches 0.6 kg/cm2 (8.5psi) or when the clogging indicator red button pops up.
  • Cleaning the semi-automatic filter must be done while the filter is under pressure
  • Gradually open the flushing valve below the filter
  • To start cleaning mode of filter, turn the handle (top of the filter) 900 degree in clockwise direction.
  • Cleaning operation starts, system pressure might increase during cleaning operation.
  • When cleaning operation done, first filter handle direction should be at filtration mode. And then flushing valve gradually close.
  • In case the the filter is still clogged (pressure indicator button is up). Repeat the above steps for effective disc cleaning.

Warning : In order to prevent water hammer (surge) always open or close filter handle valves in a gradual motion.
Questions & Answers (0)
Reviews & Ratings (0)
Write a Review
Product Image Gallery
3 Inch Semi Automatic Disc Filter for Primary & Secondary Filtration3 Inch Semi Automatic Disc Filter for Primary & Secondary Filtration